An electric remote control transporter moves loads that a forklift cannot reach and a crane costs too much to book. One operator walks beside the load, holds a handheld remote, and drives the whole thing at walking pace. No rigging crew, no radio spotter, no rental crane waiting for a free slot. This guide covers how the machine works, which capacity fits your load, where it beats plain roller skates, the real monthly savings, and the safety habits that keep a 30-ton move boring.
YG Series Electric Remote Control Transporter Parameters
| Model | YG-10 | YG-20 | YG-30 | YG-40 | YG-50 | YG-60 |
| Dimension（mm） | 500*550*145 | 670*620*165 | 740*640*185 | 810*800*182 | 810*800*182 | 1110*880*185 |
| Motor(2 sets with brake) | 500w | 750w | 1000w | 1 500w | 2000w | 3 000w |
| Controller | Dual driver D2T80A | Dual driver D2T80A | Dual driver D2T100A | Dual driver D2T200A | Dual driver D2T200A | Dual driver D2T200A |
| Battery | 48V 30AH (ternary lithium ) | 48V 60AH (ternary lithium or lithium iron phosphate) | 48V 60AH (ternary lithium or lithium iron phosphate) | 48V 120AH (ternary lithium or lithium iron phosphate) | 48V 120AH (ternary lithium or lithium iron phosphate) | 48V 100AH (ternary lithium ) |
| working current | 25A | 60A | 60A | 150A | 150A | 150A |
| Maximum towing weight | 10t | 20t | 30t | 40t | 50t | 60t |
| Plate | 10 mm Q355 steel | 10 mm Q355 steel | 12 mm Q355 steel | 16 mm Q355 steel | 16 mm Q355 steel | 16 mm Q355 steel |
| Drive wheel | 4 | 4 | 4 | 4 | 4 | 8 |
Get Electric Remote Control Transporter Price List
What Is an Electric Remote Control Transporter?
Electric load skate machine is a low, battery-powered deck with four or eight rubber-padded drive wheels. It slides under a load, lifts it a few centimeters, and drives it to a new position. One person controls speed, steering and braking from a wireless remote.
It is not a crane. It lifts only 3-5 cm, so your load must already sit on a skid, a frame or a corner casting.
How It Lifts and Drives a 30-Ton Load
- Position the deck under the load’s frame, skid or corner casting.
- Raise the platform until the load clears the floor by 2-4 cm.
- Drive with the remote at 3-5 km/h, steering with the thumb stick.
- Lower and release at the target spot, then pull the deck free.
Get Electric Remote Control Transporter Quote
Where a Remote Control Electric Transporter Pays Off
A remote control electric transporter earns its money in two settings: container depots and machine shops. Both move heavy loads short distances, many times a day.
Container Yards and Bonded Depots
Customs inspections force depots to pull boxes from the middle of a block. A reach stacker needs room to swing, and a 3.2 m aisle kills that plan. A low-profile unit slips in, lifts the corner and drags the box out.
Machine Shops and Heavy Equipment Moves
Press beds, molds and machine tools need repositioning during setup. A gantry handles the lift, but nothing handles the horizontal move. That gap is where this machine earns its keep.
Heavy Equipment Roller Skates vs. a Powered Transporter
Plain skates are cheap and simple. They also need a tow vehicle, a smooth floor and a lot of muscle. Here is the honest comparison:
| Factor | Roller skates (unpowered) | Powered transporter |
| Load capacity | 5-100 t per set | 10-60 t per unit |
| Power source | Human or towed | 48V lithium battery |
| People needed | 3-5 | 1 |
| Slope handling | Flat floor only | 3-5% grade with brakes |
| Setup time | 20-40 min | Under 5 min |
| Price band | USD 1,000-6,000 | USD 8,000-30,000 |
My advice: buy heavy equipment roller skates for one-off moves and tight budgets. Buy a powered unit when you move the same load weekly or one operator must do the job.
How to Size a Remote Control Transporter for Your Load
Four numbers decide the model. Get them right and you never overpay.
- Heaviest load, plus 20%. A loaded 40 ft container runs 26-30 t, so pick the YG-30 or YG-40, not the YG-20.
- Floor condition. Expansion joints, steel plates and ramps eat capacity, so add margin.
- Narrowest aisle. The YG-30 measures 740 × 640 mm and turns inside a 3.2 m aisle.
- Shift length. A 48V 60AH pack covers 6 hours. For two shifts, order the 120AH pack or a spare battery.
Send YG those four numbers and we will size the unit for you.
Real Numbers: What a Remote Control Transporter Saves Per Month
A depot in Latin America ran the math before buying. The figures are illustrative, but the method works anywhere.
| Cost item | Before | After |
| Crane rental (40 h × USD 130) | USD 5,200 | USD 0 |
| Charging electricity | USD 0 | About USD 180 |
| Labor per move | 3 man-hours | 1 man-hour |
| Moves per shift | 6-8 | 14-18 |
Monthly saving lands near USD 5,000, and payback on an illustrative USD 16,500 unit comes in around four months. Run your own rental rate through the table.
How to Run an Electric Transporter Safely
A 30-ton load punishes small mistakes, so build these habits from day one:
- Brakes on both motors. Holds the load on a 5% grade without rolling.
- Dead-man function. Release the remote and the machine stops within half a meter.
- Emergency stop. One red button on the deck, one on the remote.
- Stay close. Rated range reaches 50 m; stay within 10-15 m for reaction time.
- Inspect the floor. Clear loose bolts, cables and gravel before every move.
Train for one day. Theory, loaded practice, then a supervised shift.
Get Electric Remote Control Transporter Quote
Electric Remote Control Transporter FAQ: 5 Buyer Questions
Q1: How much weight can one unit move?
The YG series covers 10-60 t. The YG-30 handles a loaded 40 ft container; the YG-60 adds 8 wheels and 16 mm steel.
Q2: How long does the battery last, and how fast does it charge?
A 48V 60AH pack runs a normal 6-hour shift. A full charge takes 3-4 hours from any 110V or 220V outlet.
Q3: Can it replace a crane or a forklift?
It replaces the horizontal move, not the lift. Set the load on a skid with a crane, then let the transporter carry it.
Q4: Does it work on rough concrete or a ramp?
It handles expansion joints and 3-5% grades. Gravel and dirt stall the drive wheels, so keep it on concrete or asphalt.
Q5: What about spare parts and training?
Every unit ships with a spare wheel set and tool kit. We run video training in English or Spanish and ship common parts in 3 days.
Request a Quote for Your Electric Remote Control Transporter
Tell us your heaviest load, narrowest aisle, floor type and shift length. We reply in one working day with the right model, a quotation and a payback estimate.
We have built material handling equipment for 16 years and shipped to 60+ countries. Our engineers read your load numbers before they quote — that is the difference between a machine that sits idle and one that pays for itself.