A thermoplastic line striping machine is essential hot‑melt equipment for durable road marking on asphalt and concrete surfaces. Our YG‑360S and YG‑380S electric models support marking widths from 50‑450 mm, powered by 48V lithium battery with 5‑hour continuous runtime. They adopt synchronous clutch spreading and adjustable glass bead spreading to deliver clear, reflective traffic lines. These practical specs help road contractors complete municipal, parking lot and community marking jobs with less downtime.
Get Latest Quotation for YG Thermoplastic Line Striping Machine
YG Thermoplastic Line Striping Machine Parameters
Below table covers full specs for YG‑360S and YG‑380S models. Both are self‑propelled electric thermoplastic striping machine for mid‑size marking projects.
| Model | YG-360S | YG-380S |
| Thermoplastic Tank | synchronous clutch spreading, equipped with a speed-adjustable gear shifting device, single/double spreading can be selected according to needs, 50-200mm | synchronous clutch spreading, equipped with a speed-adjustable gear shifting device, single/double spreading can be selected according to needs, 50-200mm |
| Glass Bead Container | 10kg/box | 10kg/box |
| Adjustable glass bead spreader | Ensure the machine is moving in a straight line or turning freely on the curved road | Ensure the machine is moving in a straight line or turning freely on a curved road |
| Rear Wheel Directional Device | 100kg, double stainless steel heating insulation barrels, plug-in manual mixer devices, and removable devices | Ensure the machine moving in a straight line or turning freely on a curved road |
| Brake | Using a drum brake, you can adjust the brake tension | Using a drum brake, you can adjust the brake tension |
| Marking width | Standard 150mm marking bucket 100mm、150mm、200mm、250mm、300mm、400mm、450mm (at customers’ option) | Standard 150mm marking bucket 100mm、150mm、200mm、250mm、300mm、400mm、450mm (at customers’ option) |
| Battery Capacity | 15AH | 15AH |
| Battery Voltage | 48V lithium battery | 48V lithium battery |
| Driver Speed | 1-8km/hour | 1-8km/hour |
| Working Duration | The machine can mark road lines24 hours after charging the battery, 5 hours | Ensure the machine is moving in a straight line or turning freely on a curved road |
| Dimensions | 1210X970X1070mm | 1200X970X1100mm |
| Net weight | 130kg | 100kg, double stainless steel heating insula |
Differences Between YG‑360S and YG‑380S
YG‑360S features a wider front wheel span. When fitted with a 400mm marking bucket, the machine stays stable without tilting. This strength makes it the preferred option for municipal highway projects with wide line requirements.
YG‑380S is lighter and easier to maneuver. It has a streamlined, attractive appearance. This unit shines for parking lots and residential community marking work where frequent turns and moves are needed.
Contact YG Team For Custom Marking Bucket Options
How Thermoplastic Striping Machine Boosts Production Efficiency
Using a thermoplastic road marking machine greatly raises daily output compared with old‑school working ways.
The self‑propelled travel speed from 1‑8 km/h lets operators finish long road segments quickly. Interchangeable marking buckets remove time‑consuming modification on site. With steady paint spreading and automatic glass bead spreading, you cut repeated re‑touch‑up work.
For reference, one fully‑charged unit can handle 7‑9 kilometers of marking lines within a normal work shift. More finished jobs per day directly lift your project turnover and profit margin.
Advantages of Road Marking Equipment
Traditional thermoplastic road‑marking projects usually require a construction team of 7‑8 workers. Manual or outdated construction methods bring many drawbacks, while professional thermoplastic marking equipment delivers remarkable upgrades.
Thermoplastic coating consists of synthetic resin, glass beads, coloring pigments, body fillers and additives. When applied with YG marking machines, finished lines reach 1.5‑1.8 mm in thickness with obvious three‑dimensional texture. It features outstanding wear resistance and excellent retro‑reflective performance. The marking cures in only 6 seconds, enabling road traffic to resume rapidly. Under normal conditions, service life can last 2‑4 years.
- Consistent marking quality: Machines guarantee uniform thickness and neat edges, avoiding wavy lines caused by manual operation.
- Optimized labor input: YG self‑propelled machines greatly cut workforce requirements compared with the traditional 7‑8‑person crew.
- Durable performance: Wear‑resistant markings fit high‑standard roads and highways, and thermoplastic marking accounts for 90% of domestic road‑marking applications.
- Material‑saving: Stable spreading controls material consumption, reducing overall project cost (reference cost about $2.4 per ㎡, local rates vary).
- High construction safety: Fewer staff work on busy road surfaces and lower exposure to traffic risks.
Manual marking is only suitable for tiny repair work and cannot satisfy large‑scale highway and municipal tender projects.
Get Thermoplastic Line Striping Machine Price
How Does Thermoplastic Line Marking Machine Work?
Thermoplastic marking requires cooperation between a melting kettle and the striping machine. First, powdered thermoplastic coating is loaded into the melting kettle, heated to 180℃‑210℃ and forcefully stirred to achieve a fully molten liquid state. The hot molten material is then transferred into our YG‑360S or YG‑380S thermoplastic striping machine.
While the machine travels forward, the matched marking bucket evenly applies hot coating onto the road surface, producing clean‑edged, uniform‑thickness three‑dimensional markings. During application, glass beads are half‑embedded into the fresh hot marking layer, creating retro‑reflection at a 45‑degree refraction angle for excellent night‑time visibility. These two machine models adopt swap‑able marking buckets, supporting one‑pass line widths ranging from 50 mm to 450 mm. Standard consumables are thermoplastic paint, prime coating and glass beads, following the mixing ratio of 4 : 0.1 : 0.3.
Get Thermoplastic Line Striping Machine Price
Applications of Thermoplastic Road Striping Machine
This thermoplastic road striping machine handles most hot‑melt marking tasks across public and private sites.
✅ Municipal public roads, highway lane dividers, edge lines and zebra crosswalks
✅ Shopping mall, office park and residential community parking lots
✅ Container terminals, warehouse yards and industrial factory floor marking
✅ Airport apron non‑runway traffic lines, logistics zone guidance lines
✅ Urban road renovation and traffic safety upgrading projects
It is not suitable for temporary short‑term marking jobs. For temporary lines, cold spray marking machines will be a better match.
Get Thermoplastic Line Striping Machine Price
Customer Success Stories for Road Marking Equipment
Project Background and Key Challenges
A top Southeast‑Asian road contractor undertook a 28‑km urban municipal road upgrade. The project faced major hurdles: all marking work had to be done overnight to avoid traffic disruption. Complex road layouts, including multi‑lane roads, sharp bends, bus lanes and crosswalks, demanded precise marking width compliance. Their old manual tools and low‑end stripers needed large work crews, produced uneven coating and poor night reflectivity, causing frequent rework and higher costs.
Solution and Machine Selection
The contractor upgraded to YG‑360S and YG‑380S thermoplastic line striping machines.
- 50‑450 mm adjustable marking width for lane lines, edge markings and zebra crossings
- Synchronous glass‑bead spreader & accurate flow control for consistent thickness and high reflectivity
- Rear‑wheel steering plus drum‑brake system for stable operation on straights and tight urban curves
- Durable battery and heat‑insulated barrels for continuous overnight construction
Implementation and On‑site Performance
On‑site performance proved excellent. Operating at 1‑8 km/h, the machines produced neat, uniform lines with no paint leakage. The steering system handled sharp bends and complex intersections to meet local standards. The speed‑linked glass‑bead spreader ensured qualified retro‑reflective performance right after installation for night‑time safety.
Results & Business Impact
YG equipment brought significant gains:
- Labor costs cut by nearly 40%, freeing staff for other assignments
- 28‑km marking finished days ahead of schedule, avoiding contract penalties and winning official recognition
- Zero rework with 100‑percent first‑pass inspection on thickness, adhesion and reflectivity
- Lower operating costs and better reputation helped win subsequent municipal maintenance contracts
Customer Testimonial
“The YG thermoplastic line striping machine greatly boosts our site productivity. It is easy‑to‑operate with accurate line control and steady glass‑bead dispersion. It reduces labor reliance and lifts project profitability.”
Get Thermoplastic Line Striping Machine Price
Price Considerations for Road Marking Machines
Buyers should never judge road marking machines purely on the initial quotation. Multiple factors shape real‑world total cost.
- Configuration level: Heating barrel material, lithium‑battery quality, clutch and spreading system decide service lifespan. Cheap iron‑barrel models sell cheaper but wear out rapidly.
- Available accessories: Confirm whether marking buckets, glass‑bead spreader and wearing‑part kits are included or sold separately.
- Spare‑part supply capacity: Some low‑price suppliers cannot ship replacement components fast, stopping your whole construction schedule.
- Manufacturer support: English‑language documentation, operation videos and remote technical guidance add hidden value for overseas importers.
- Model matching your jobs: Buying over‑spec heavy‑duty units for small parking‑lot projects creates unnecessary capital waste.
Frequently Asked Questions
Q1: What temperature should thermoplastic paint reach before feeding into this thermoplastic line striping machine?
A: Recommended working temperature is 180‑210°C. Over‑heating will burn paint and reduce final line service life. You need a separate pre‑melter kettle to melt raw thermoplastic powder first.
Q2: Can I change marking width on site quickly?
A: Yes. You just swap different marking buckets. Standard delivery includes 150mm bucket; other sizes are optional accessories. Allow 5‑8 minutes for bucket replacement.
Q3: What main wearing parts should I prepare for long‑term operation?
A: Glass‑bead spreader blades, sealing strips of marking bucket, drum‑brake friction pieces. YG can offer wearing‑part package together with machine order.
Q4: YG‑360S vs YG‑380S, which model should I pick?
A: Choose YG‑360S if you mostly work on municipal roads and need to use 400mm wide marking buckets. Its wide front wheel base prevents tilting during wide line marking. Pick YG‑380S for parking lots and residential areas; it is lightweight, easy to push and has a nice look for frequent site transfers.
Q5: What after‑sales support can YG provide for overseas buyers?
A: We supply English operation manual and video tutorials. For quality‑related failures within warranty period, we arrange spare‑part delivery. We do not provide on‑site overseas engineer service normally.
Get Thermoplastic Line Striping Machine Price
Thermoplastic Line Striping Machine for sale-YG Machinery
A reliable thermoplastic line striping machine improves your construction efficiency and marking quality. YG thermoplastic line striping machines have been exported to North America, Europe, India, Southeast Asia and Japan, gaining wide recognition from local road‑marking contractors. Whether you need equipment for municipal roads, highways or parking‑lot projects, feel free to contact YG Machinery for product details, quotations and global shipping solutions.
